- Adhesives & Sealants[10]
- Other Organic Chemical[2]
- Catalyst[1]
- Chemical Auxiliary Agent[5]
- Daily Chemicals[1]
- Other Chemicals[1]
- LCD Modules[1]
- Other Printing Materials[3]
- Transfer Printing[2]
- Other Plastic Raw Materials[3]
- Other Rubber Products[3]
- Rubber Sheets[4]
- Other Rubber Raw Materials[1]
- Silicone Rubber[10]
- Contact Person : Ms. Wu Alice
- Company Name : Shenzhen Hong Ye Jie Technology Co., Ltd.
- Tel : 86-755-89948013
- Fax : 86-755-89756930
- Address : Guangdong,Shenzhen,Liulian Shibi Industrial Zone, Pingdi Town, Longgang District,Shenzhen
- Country/Region : China
- Zip : 518117
FDA silicone for shoe soles making
FDA silicone for shoe soles making Application:
1) Vacuum casting Rapid prototyping
2) Encapsultion, potting for electronics, LED module
3) Mould making
4) For making printing pads
5) Mold for Urethane (polyurethane) Polyester casting resin ,expoxy resin, Low melt metals (mold life can be short)Cement, Concrete epoxy Soap ,Wax ,rings, pendants, earrings, religous, bridal, bands, mens jewelry, cuffs, bracelets, charms, nautical, findings, customs, sports,
6) tradmarks injection molding
7) shoe sold making
8) dentals mold making
FDA silicone for shoe soles making Special Characteristics:
1) Different Shore A Hardness available from 0 to 65 Shore A with flexibility and toughness
2) Fast and non shrink cure at room temperature which could can be accelerate considerable by the application of heat
3) Good transparency of the cured rubber allows split lines to be cut accurately in block molds
4) Low visicosty two components for easing filling,High tear strength, long life of the molds
5) almost nil shrinkage
6) high degree of precision in reproduction
7) environmental, odorless and nontoxic
8) FDA approved
Storage, shelf life and handling precautions:
1. Shelf life can be 12 months when stored at 25°C in tightly closed original packages.
2. Storage beyond the expired date does not necessarily mean that the product is no longer
usable. In this case , the properties required for the intended use must be checked for quality assurance reasons.
3. The curing agent may denature if the cap is left off after opening.Make sure to tightly seal the products prior to storage. Take particular care under conditions of high temperature or humidity.
4. If any of these products should come into contact with skin,wipe the exposed area with a cloth and then wash it thoroughly with soap.
Any more information about our FDA silicone for shoe soles making, please fell free to contact with Ms. Apple .
Tel: 0086-755-89948013
Mobile: 0086-15889446131
FDA silicone for shoe soles making