- LCD Modules[1]
- Adhesives & Sealants[10]
- Silicone Rubber[10]
- Other Chemicals[1]
- Other Plastic Raw Materials[3]
- Catalyst[1]
- Other Printing Materials[3]
- Other Organic Chemical[2]
- Transfer Printing[2]
- Other Rubber Products[3]
- Rubber Sheets[4]
- Other Rubber Raw Materials[1]
- Chemical Auxiliary Agent[5]
- Daily Chemicals[1]
- Contact Person : Ms. Wu Alice
- Company Name : Shenzhen Hong Ye Jie Technology Co., Ltd.
- Tel : 86-755-89948013
- Fax : 86-755-89756930
- Address : Guangdong,Shenzhen,Liulian Shibi Industrial Zone, Pingdi Town, Longgang District,Shenzhen
- Country/Region : China
- Zip : 518117
Supply pourable molding silicone rubber
HY- E600# Addition Molding Silicone
Description
HY- E600# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA molds application.
Applications,
HY- E600# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of HY-E600# molding silicone
Model | HY-E600# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 0-2 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 5000±3000 |
Tensile-strength( kgf /cm2 ) | >10 |
Tear-strength (kgf /cm2 ) | > 2 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E600# molding silicone:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail, 200kg/pail.
Anymore information about addition cure silicone rubber, please feel free to contact Miss Apple.
TEL: 0086-755-89948013
Mobile: 0086-15889446131
Supply pourable molding silicone rubber
